Shenyang Jianzhu Daxue Xuebao (Ziran Kexue Ban)/Journal of Shenyang Jianzhu University (Natural Science)
Scopus Indexed (2026)
Scopus Q3 (2026)
English Version
|| All Published Journal ||
Shenyang Jianzhu Daxue Xuebao (Ziran Kexue Ban)/Journal of Shenyang Jianzhu University (Natural Science)
Application of GM-BP Combination Prediction Model in Bridge Construction Monitoring
Structural health monitoring (SHM) systems are used to analyze the health of infrastructures such as bridges, using data from various types of sensors. While SHM systems consist of various stages, feature extraction and pattern recognition steps are the most important. Consequently, signal processing techniques in the feature extraction stage and machine learning algorithms in the pattern recognition stage play an effective role in analyzing the health of bridges. In other words, there exists a plethora of signal processing techniques and machine learning algorithms, and the selection of th
MASW-Based Interfacial Debonding Damage Identification of Steel Concrete Composite Plates
In this study, the transient multichannel analysis of surface waves (MASW) is proposed to detect the existence, the location and the length of interface debonding defects in rectangular concrete-filled steel tubes (CFST). Mesoscale numerical analysis is performed to validate the feasibility of MASW-based interfacial debonding detection. Research findings indicate that the coaxial characteristics in the Rayleigh wave disperse at the starting point of the debonding area and gradually restores at the end of the defect. For healthy specimens, the surface wave mode in CFST is closer to the Rayle
Nonlinear Responses and Seismic Isolation Analysis of a Curved Bridge Considering Pounding Effect
Due to structural irregularity, curved bridgesaremore likely to cause non-uniform collisions and unseating between adjacent components when subjected to earthquakes. Based on the analysis of the collision response of curved bridges duringearthquakes, and according to the seismic characteristics of curved bridges, research was carried out on pounding mitigation and unseating prevention measures. A curved bridge with double column piers was taken as an engineering example, and a finite element model of curved bridges that could consider the non-uniform contact collision between adjacent compo
Finite Element Analysis of Eccentric Compression Performance of Precast Assembled Concrete-Filled Steel Tube Columns
A new finite element (FE) model was constructed with ABAQUS, and the applicability of the model was verified by the coincidence with typical damage modes and load-compression curves in the tests, and the axial compression performance of the precast circular semi-continuous concrete-filled steel tube (PCSCFST) columns was investigated. The effects of diameter-thickness ratio, slenderness ratio, yield strength, etc. on the axial compression performance of the PCSCFST columns were investigated by parametric analysis. The changes in slenderness ratio, yield strength and diameter-thickness ratio
Research on the Fault Prediction of Cutter System of Full Face Rock Tunnel Boring Machine Based on BP Neural Network
Rock mass conditions are extremely sensitive to tunnel boring machine (TBM) tunneling. Therefore, establishing a surrounding rock excavatability (SRE) classification system applicable to TBM tunnels. Accurately and intelligently identifying excavatability grades can also facilitate efficient TBM tunneling and intelligent construction. Specific excavation and penetration rates were used to evaluate SRE. Their correlations with geological and tunneling parameters were explored using the field data from two water conveyance tunnels in China with different lithologies. A high-precision empirica
